View ZL60003_338632.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ZL60003
Plastic Optical Fiber Communications 125 to 250Mbps Data Sheet
DS5612 Issue 1 June 2002
Ordering Information ZL60003/TBD TO-46 Package -20 to +700C
Description
This unique Resonant Cavity Surface-Emitting LED (RCLED) is designed for optical communications over Plastic Optical Fiber (POF) in applications such as IEEE1394b (S100, S200) and 155 Mbps ATM. For very high speed operation, i.e. above 200 Mbps, an electrical pre-emphasis circuit is recommended to increase the bandwidth of the device. ZL60003 is also well suited for applications where visible light is required, such as in sensing and positioning.
04.7 01.5 0.6 ANODE CASE CATHODE
Features
* * * * * * Optimized wavelength for Plastic optical fiber High Bandwith No threshold Surface emitting High coupling efficiency Hermetically sealed
Applications
* * * * IEEE1394b 155Mpbs ATM Homenetworking Industrial applications
3.7 2.5 14 0.4 Side View 5.4 Bottom View All dimensions in mm. The chip is isolated from the case.
Figure 1 - Pin Description
Parameter Fiber-Coupled Power Optical Power Beam Divergence (FWHM) Bandwidth (3dBel) Peak Wavelength Spectral Width (FWHM) Forward Voltage
Symbol Pfiber Po 21/2 fc p VF
Min 1.2
Typ
Max
Unit mW
Test Condition IF=30mA (Note1) IF=30mA IF=30mA IF=30mA (Note1) IF=30mA (Note1) IF=30mA (Note1) IF=30mA
2.0 25 125 640 650 660 20 2.3
mW deg MHz nm nm V
Note: Fiber: POF 980/1000m Step Index, NA=0.48. For high speed communication, a low NA POF or a graded index POF are recommended.
Table 1 - Optical and Electronic characteristics (25oC Case temperature)
SEMICMF.017
1
ZL60003
Parameter Storage Temperature Operating Temperature Electrical Power Dissipation Continuous Forward Current (f<10 kHz) Peak Forward Current (duty cycle<50%,f>1 MHz Reverse Voltage Soldering Temperature (2mm from the case for 10 sec.) Symbol Tstg Top Ptot IF IFRM VR Tsld
Data Sheet
Limit -55 to +1250C -20 to +700C 130 mW 40 mA 85 mA 5V 2600C
Table 2 - Absolute Maximum Ratings
Parameter Thermal Resistance - Infinite Heat Sink Thermal Resistance - No Heat Sink Temp. Coefficient - Wavelength Optical Power - Fiber Coupled
Symbol Rthjc Rthja d/dTj dPf/dTj
Min
Typ 200 500 0.08 -0.7
Max
Unit
0C/W 0C/W
nm/0C %/0C
Table 3 - Thermal Characteristics
2
SEMICMF.019
For more information about all Zarlink products visit our Web Site at
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. trading as Zarlink Semiconductor or its subsidiaries (collectively "Zarlink") is believed to be reliable. However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink. This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink's conditions of sale which are available on request.
Purchase of Zarlink's I2C components conveys a licence under the Philips I2C Patent rights to use these components in an I2C System, provided that the system conforms to the I2C Standard Specification as defined by Philips. Zarlink and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2002, Zarlink Semiconductor Inc. All Rights Reserved.
TECHNICAL DOCUMENTATION - NOT FOR RESALE

▲Up To Search▲

Price & Availability of ZL60003

	To Download ZL60003 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .